• <object id="psnmn"></object>
  • <table id="psnmn"></table>

        Product center

        location:HOME-Product center

          ◆The machining process was completely done onto Three-dimensional Processing Center LNC Taiwan. The software program can ensure the interconvertibility.

          ◆There is not the seam cross-linking material due to the reasonable design, even heating & easy operation. The channel keeps smooth without the blind corner.

          ◆Each layer can centering automatically and has the function centering & manual centering & fast die-change.

          ◆The crosshead materials for 38CrMoAIA and adopts the sphenecal sealing through the connection guide tube and thread pressing mode.

          ◆The crosshead can achieve the single layer extrusion, dual-layer & triple-layer co-extrusion equipped with the independent spreader and die, easy and convenient to operate, good performance.

          ◆The distributor adopts the Bi-flow design with two advantages: same pressure drop on the length direction and same material flow on the circle direction. And the equal pressure drop cannot bring the secondary eccentric while speed-up with the linkage.

          ◆The design allows a quick change of tools while the crosshead is not disassembled. Under the condition of that the extruder is not cleaned, we can change the dies and ensure the continuous production. If it was the closed specs, we can change the dies without stop.

          ◆The crosshead including the trial dies are all made onto Three-Dimensional Processing Center

          ◆Quick change of tools time: about 5mins.

          ◆三層共擠干法交聯機頭 Triple-layer Co-extrusion Dry-cure Crosshead

          型號Type: SLJT35/75 SLJT240/120

          進線直徑Inlet OD: φ6-φ38mm φ14-φ60mm

          出線直徑Outlet OD: ≤φ75mm ≤φ100mm

          擠包厚度Extrusion Thickness:

          Inner Screen: 0.4-2.0mm Inner Screen: 0.5-3.0mm

          Insulation: 2.5-12mm Insulation: 2.5-24mm

          Outer Screen: 0.4-2.0mm Outer Screen:0.5-3.0mm

          ◆三層共擠橡套連硫機頭 Triple-layer Co-extrusion Rubber CV Crosshead

          型號Type: XTJT35/75 XTJT35/150

          進線直徑 Inlet OD: φ6-φ38mm φ50-φ120mm

          出線直徑Outlet OD: ≤φ75mm ≤φ100mm

          擠包厚度Extrusion Thickness:

          Inner Screen: 0.4-2.0mm Inner Screen:1.0-3.0mm

          Insulation: 2.5-12mm Insulation: 2.5-12mm

          Outer Screen: 0.4-2.0mm Outer Screen: 1.0-3.0mm

          ◆單層橡套連硫機頭 Single-layer Rubber CV Crosshead

          型號Type: φ80 φ110

          進線直徑Inlet OD: φ16-φ60mm φ50-φ90mm

          出線直徑Outlet OD: ≤φ80mm ≤φ110mm

          擠包厚度Extrusion Thickness: 2.0-8.0mm 2.0-10.0mm

      1. <object id="psnmn"></object>
      2. <table id="psnmn"></table>